This build log follows the arcade cabinet build including wiring and assembly using an MDF cabinet and a Raspberry Pi 2 and 3.
This is a basic cabinet that doesn’t use vinyl graphics, or T-molding. Those will be used in future builds.
There is still much to be improved with these builds. These are a starter project that still leave much to be customized. If you have cool ideas please let me know in the comments below!
Programming the GPIO buttons to work with RECALBOX:
https://youtu.be/yQRphxYgaMA
All the plans can be downloaded from: http://holbrooktech.weebly.com/pi-arc…
After taping together the side panels sheets measure them before cutting any wood/mdf to make sure your printer settings were correct. I personal use 11×17″ paper and haven’t tried the 8.5 x 11″ paper.
More explanations and downloadable packages!
Instagram https://www.instagram.com/we_build_st…
Recalbox: https://www.recalbox.com
Raspberry Pi operating system – donate to them!
One of my favorite eBay stores: http://stores.ebay.com/sinoarcade
joystick and button sets for $60-$100
My Local suppliers
http://www.rpelectronics.com/
http://leeselectronic.com/en/
Original Cabinet design by http://www.instructables.com/member/r…